Service Guide

32 Intel® Server System SR2600UR/SR2625UR Service Guide
SAS/SATA Midplanes
The midplane serves as the primary interface between the server board, hot-swap
backplane, and control panel. Two midplanes are offered for this system:
• Passive SATA/SAS midplane (data cables required)
• Active SAS/SATA RAID midplane (no data cables required)
Passive Midplane
The following diagram show the location for each connector found on the
passive midplane.
Figure 17. Passive Midplane Components
Note: SATA connectors 6 and 7 are not used in the Intel
®
Server System SR2600UR/SR2625UR.
AF000047
E
A
J
B
C
F
G
I
H
D
A. Midplane Power Connector F. Fan 4 Power Connector
B. Fan 6 Power Connector G. Fan 3 Power Connector
C. Fan 5 Power Connector H. Fan 1 Power Connector
D. SATA 0-7 Connectors I. Fan 2 Power Connector
E. Bridge Board Connector J. Backplane Connectors