Service Guide

24 Intel® Server System SR2600UR/SR2625UR Service Guide
Figure 12. Standard Control Panel
Intel
®
Local Control Panel
The following diagram shows the features available on the Intel
®
Local Control Panel.
D. Power/Sleep LED Continuous green light indicates the system has power applied to
it or the system is in ACPI S0 state.
Blinking green indicates the system is in sleep or ACPI S1 state.
No light indicates the power is off or the system is in ACPI S4 or
S5 state.
E. Hard Disk Drive
Activity LED
Random blinking green light indicates hard disk drive activity (SAS
or SATA).
No light indicates no hard disk drive activity.
F. System Status LED Solid green indicates normal operation.
Blinking green indicates degraded performance.
Solid amber indicates a critical or non-recoverable condition.
Blinking amber indicates a non-critical condition.
No light indicates POST is running or the system is off.
G. System Identification
LED
Solid blue indicates system identification is active.
No light indicates system identification is not activated.
H. System Identification
Button
Turns on/off the system identification LED.
I. Reset Button Reboots and initializes the system.
J. USB 2.0 Port Allows you to attach a USB component to the front of the system.
K. NMI Button Puts the server in a halt-state for diagnostic purposes and allows
you to issue a non-maskable interrupt. After issuing the interrupt,
a memory download can be performed to determine the cause of
the problem.
L. Video Port Allows you to attach a video monitor to the front of the system.
The front and rear video ports cannot be used at the same time.
Callout Feature Function