Service Guide

132 Intel

Server System SR2600UR/SR2625UR Service Guide

14. Install the PCI riser assembly. For instructions, see “Installing the PCI Riser

Assembly” on page 51.

Replacing a System Fan

Replacing a Redundant System Fan

Note: The fans that are integrated into the power supply cannot be replaced separately. If one of

the fans in the power supply fails, the power supply must be replaced.

The system fans at the front of the server system can be individually replaced if one of

them fails.

To replace a system fan, follow these steps:

1. Grasp the failed fan and lift straight up to remove it from the module (see

Figure 126).

Figure 126. Removing a Fan from the Redundant Fan Module

2. Position the replacement fan so the connector on the fan is at the right and pointing

down.