Service Guide

Intel
®
Server System SR2600UR/SR2625UR Service Guide 129
14. Install the PCI riser assembly. For instructions, see “Installing the PCI Riser
Assembly” on page 51.
Replacing a Fixed Fan Module
To replace a fixed fan module, follow these steps:
1. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser
Assembly” on page 50.
2. Remove the processor air duct. For instructions, see “Removing the Processor Air
Duct” on page 56.
3. Remove the large air baffle. For instructions, see “Removing the Large Air Baffle”
on page 70.
4. Remove the fan baffle. For instructions, see “Removing the Fan Baffle” on page 67.
5. Remove the bridge board. For instructions, see step 5 in “Removing the Midplane
Board” on page 103.
6. Disconnect the fan cables from the midplane.