Service Guide
120 Intel
®
Server System SR2600UR/SR2625UR Service Guide
— If a filler panel is installed, press the release lever (see letter “A” in Figure 112)
and use the finger hole (see letter “B” in Figure 112) to remove the filler panel.
Figure 112. Removing Power Supply Filler Panel from the Server System
— If a power supply is installed, push the green latch in the direction shown (see
letter “A” in Figure 113) and remove the power supply module by pulling it out
by the handle (see letter “B” in Figure 113) to remove it.
Figure 113. Removing Power Supply Module from the Server System
2. Do one of the following:
— Insert the replacement power supply module into the power supply cage and
push all the way until it clicks into place.
Figure 114. Installing Power Supply Module into the Server System
AF000021
B
A
AF000022
A
B
AF000024