Service Guide

116 Intel
®
Server System SR2600UR/SR2625UR Service Guide
7. Remove the Intel
®
RMM3, if installed. For instructions, see “Removing the Intel
®
RMM3” on page 102.
8. Disconnect all cables from the server board.
9. Remove memory. For instructions, see “Removing DIMMs” on page 59.
10. Remove the processor heatsink(s) and processor(s). For instructions, see
“Removing the Heatsink” on page 64.
11. Remove the nine screws from the server board (see letter “A” in Figure 109) and
lift the server board from the server system (see letter “B” in Figure 109).
Figure 109. Removing the Server Board
12. Install the replacement server board. For instructions, see “Installing the Server
Board” on page 119.
AF002980
A
B