Service Guide

110 Intel
®
Server System SR2600UR/SR2625UR Service Guide
b. Align the holes on the backplane board with the six hooks in the server system
(see letter “B” in Figure 104).
c. Slide the backplane board in the direction shown to lock it in place (see letter “C”
in Figure 104).
d. Secure the backplane with the blue thumscrew (see letter “D” in Figure 104).
Figure 104. Installing the Backplane in the Intel
®
Server System SR2625UR
4. Install hot-swap drive carriers. For instructions, see “Installing a SAS or SATA
Hot-swap Hard Disk Drive” on page 71.
5. Install the midplane board. For instructions, see “Installing the Midplane Board” on
page 105.
6. Connect necessary cables to the backplane.
AF003111
D
C
A
B