Service Guide

Intel

Server System SR2600UR/SR2625UR Service Guide 93

4. Slide the drive tray containing the installed 2.5-inch hard disk drives into the

system until it clicks into place as shown in Figure 84.

Figure 84. Installing the 2.5-inch fixed HDD assembly

5. Connect one end of the power cable to the SAS/SATA connector on the back side of

the backplane (see letter “A” in Figure 85).

6. Connect the other end of the power cable to the two hard disk drives (see letter “B”

in Figure 85).

7. Connect one end of the data cables to the SATA connectors on the server board (see

letter “C” in Figure 85) or SAS/SATA connectors on the SAS/SATA add-in PCI

card.

AF003037