Specification update

Enterprise Platforms and Services Marketing Monthly Specification Update
9
Implication During HDD ESRT2 RAID rebuild, there's flood HDD fault assert/deassert(SAS
RAID) or Rebuild/remap (SATA RAID) logs into SEL.
Status This issue may be fixed in a future BIOS release
Workaround None.
17.
High CPU utilization may occur when installing or running Microsoft*
Windows* Server 2008 R2 or Microsoft* Windows* 7 with default NIC
driver
Problem There has been high CPU load observed when installing or running Microsoft
Windows Server 2008 R2 or Microsoft Windows 7 with default NIC (Network
Interface Card) driver.
Implication When the ports are not electrically "linked" and the embedded driver is loaded
the DPC rate steadily increases until the system slows to the point where it is
essentially unusable.
Status This issue may be fixed in a future driver release.
Workaround None.
18.
On-board VGA cannot be set to the highest resolution (1920x1080 and
higher)
Problem The Graphics ID register in the on-board video controller is getting set
incorrectly.
Implication The video cannot be set to the highest resolutions listed here:
• [1920x1080,High 256 Color, 60 Hertz]
• [1920x1200,High 256 Color, 60 Hertz]
• [1920x1080,High Color(16bit), 60 Hertz]
• [1920x1200,High Color(16bit), 60 Hertz]
Status This issue may be fixed in a future BMC release.
Workaround None.