Service Guide

Hardware Installations and Upgrades
70 Intel® Workstation System SC5650SCWS Service Guide
Figure 80. Install Feed on Pedestal-configured Chassis
5. Put chassis in the upright position.
6. Reconnect all peripheral devices and the AC power cable to the workstation. Power up the workstation.
Replacing the CMOS Battery
The lithium CMOS battery on the workstation board powers the RTC (Real-Time Clock) in the absence of
power. When the battery starts to weaken, it loses voltage, and the system settings stored in CMOS RAM in
the RTC (for example, the date and time) may be wrong. Contact your customer service representative or
dealer for a list of approved devices.
WARNING
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the equipment manufacturer. Discard used
batteries according to manufacturer’s instructions.
ADVARSEL!
Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med
batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren.
ADVARSEL
Lithiumbatteri - Eksplosjonsfare. Ved utskifting benyttes kun batteri som anbefalt av
apparatfabrikanten. Brukt batteri returneres apparatleverandøren.
VARNING
Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent
typ som rekommenderas av apparattillverkaren. Kassera använt batteri enligt
fabrikantens instruktion.