Service Guide

Hardware Installations and Upgrades
Intel® Workstation System SC5650SCWS Service Guide 69
Figure 79. Inserting Fixed Drive Cage into Chassis
10. Make the backplane and workstation board cable connections.
11. Reinstall system fan duct and chassis left side cover if available.
Install Feed for a Pedestal-configured Chassis
/
NOTE
Do not install feet on your Intel
®
Workstation System SC5650SCWS, if it is to be
installed in a rack. Only install feet on a pedestal-configured chassis.
1. Observe the safety and ESD precautions listed in “Safety Information”.
2. Power down the workstation and unplug all peripheral devices and the AC power cable.
3. Lay the chassis down on its right side.
4. Insert rubber foot into chassis hole (see letter “A” in the following figure). Secure foot to chassis by
inserting a pin through the rubber foot (see letter “B”). Repeat process for remaining feet.