Service Guide

Hardware Installations and Upgrades
68 Intel® Workstation System SC5650SCWS Service Guide
Figure 77. Removing Fan from Fixed Drive Cage
8. Install the new system fan in the snap-in bracket is shown in the following figure.
Figure 78. Installing Fan on Fixed Drive Cage
9. Slide the drive cage into the drive bay slot on the chassis. You should hear a click when the blue plastic
retention mechanism locks into place. Be sure to feed the fan cable through the slot first so it exits through
the back of the drive cage. Connect the fan cable to its connector on the workstation board (System Fan 3
header)