Service Guide

Hardware Installations and Upgrades
66 Intel® Workstation System SC5650SCWS Service Guide
Figure 74. Removing Rear System Fan from Chassis
6. Reconnect the fan cable to the workstation board System fan 5 header (see letter “A”). Install the new
system fan in the snap-in bracket is shown in the following figure (see letter “B”).
Figure 75. Installing Rear System Fan from Chassis
7. Install the system fan duct. For instructions, see “Removing and Installing System Fan Duct”.
8. Install the left side cover. For instructions, see “Installing the Left Side Cover”.
9. Plug all peripheral devices and the AC power cable into the workstation. Power up the workstation.