Service Guide

Hardware Installations and Upgrades
Intel® Workstation System SC5650SCWS Service Guide 61
Figure 66. Removing Standoffs from Front Panel Board
9. Attach the front panel cable (see letter “A” in the following figure) and the chassis intrusion cable (see letter
“B”) to the new front panel board. Slide the new front panel board through the opening in the left side of
chassis (see letter “C”).
Figure 67. Installing Front Panel Board in Chassis
10. Use one hand to align the front panel board in position inside the chassis. With your other hand, tighten the
three screws to secure the front panel board to the front of the chassis.