Service Guide

Hardware Installations and Upgrades
Intel® Workstation System SC5650SCWS Service Guide 53
6. Remove any PCI add-in boards that use the PCI card guide. For instructions, see
“Removing PCI Add-in Boards”.
7. Route the required power cables and data cables through the cable routing hole (see
letter “A”) on the PCI card guide.
Figure 52. Cable Routing Area on PCI Card Guide
8. Route the required power cables and data cables from behind the PCI card guide through
the cable routing area at the bottom of the fixed drive cage.
Figure 53. Routing Fixed Hard Drive Required Power Cables and Data Cables
9. Pull the drive latch forward to unlatch the drive locking assembly for the drive bay you
want to install a hard drive in.