Service Guide

Hardware Installations and Upgrades
52 Intel® Workstation System SC5650SCWS Service Guide
Figure 50. Fixed Hard Drive Bay Slot Order (SAS/SATA drives illustrated)
1. Observe the safety and ESD precautions listed in Appendix A, “Safety Information”.
2. Power down the workstation and unplug all peripheral devices and the AC power cable.
3. Remove the left side cover. For instructions, see “Removing the Left Side Cover”.
4. Remove the front bezel assembly. For instructions, see “Removing the Front Bezel
Assembly”.
5. Loosen thumb screw and remove the drive cage EMI shield (see letter “A” in the following
figure).
Figure 51. Removing EMI Shield from Fixed Hard Drive Cage