Service Guide

Hardware Installations and Upgrades
Intel® Workstation System SC5650SCWS Service Guide 51
Figure 49. Re-attaching Hard Disk Drive Cage EMI Shield
12. Re-install the front bezel assembly. For instructions, see “Removing and Installing the Front Bezel
Assembly”
13. Re-install the left side cover. For instructions, see “Installing the Left Side Cover”.
14. Plug all peripheral devices and the AC power cable(s) back into the workstation. Power up the workstation.
Installing and Removing a Fixed Hard Drive
You can install up to six fixed hard drives in the fixed hard drive cage that ships with the Intel
®
Workstation
System SC5650SCWS. Power requirements for each individual hard drive may limit the maximum number of
drives that can be integrated into the workstation system.
/
NOTE
The Intel
®
Workstation System SC5650SCWS does not support all hard drives. See
“Additional Information and Software” for a web link to a list of supported hard drives.
Installing a Fixed Hard Drive
CAUTION
Fixed drives are NOT hot-swappable. Before removing or replacing the drive, you
must first take the workstation out of service, turn off all peripheral devices connected
to the system, turn off the system by pressing the power button, and unplug the AC
power cord from the system or wall outlet.
WARNING
You MUST populate drive bay slots 1, 3, and 5 first. Failure to do so could result in
thermal issues within the chassis..