Service Guide

Hardware Installations and Upgrades
50 Intel® Workstation System SC5650SCWS Service Guide
6. Disconnect cables from any installed fixed hard drives. If necessary, remove hard drives from fixed hard
drive cage. For instructions on removing fixed hard drives, see “Removing a Fixed Hard Drive”.
7. Push the blue plastic release mechanism upward to release the fixed hard drive cage (see letter “A” in the
following figure). Once released, pull the fixed hard drive cage from the chassis (see letter “B”).
Figure 47. Release Fixed Hard Drive Cage from Chassis
8. Remove any PCI add-in boards that are present.
9. Slide the fixed hard drive cage into the drive bay slot of the chassis. You should hear a click when the blue
plastic retention mechanism locks into place.
Figure 48. Inserting Fixed Hard Drive Cage into Chassis
10. If previously removed, install fixed hard drives and connect power and data cables. For instructions, see
“Installing a Fixed Hard Drive”.
11. Re-attach the drive cage EMI shield to the fixed hard drive cage and tighten the thumb screw.