Service Guide

Hardware Installations and Upgrades
Intel® Workstation System SC5650SCWS Service Guide 49
Figure 45. Installing PCI Slot Shield
8. Reinstall the left side cover. For instructions, see “Installing the Left Side Cover”.
9. Reconnect all peripheral devices and the AC power cable(s). Power up the workstation.
Replacing the Fixed Hard Disk Drive Cage
1. Observe the safety and ESD precautions listed in Appendix A, “Safety Information”.
2. Power down the workstation and unplug all peripheral devices and the AC power cable.
3. Remove the left side cover. For instructions, see “Removing the Left Side Cover”.
4. Remove the front bezel assembly. For instructions, see “Removing the Front Bezel Assembly”.
5. Loosen thumb screw and remove the drive cage EMI shield (see letter “A” in the following figure).
Figure 46. Removing EMI Shiled from Fixed Hard Drive Cage