Service Guide

Hardware Installations and Upgrades
Intel® Workstation System SC5650SCWS Service Guide 45
Figure 38. Removing CD-ROM or DVD-ROM Drive (SATA Optical Drive is shown)
6. If reinstalling a new CD-ROM or DVD-ROM drive, see “Installing a DVD-ROM or CD-ROM Drive” for
instructions. If not replacing the drive, reinstall the EMI shield and front bezel filler panel, if available.
Figure 39. Installing 5.25-inch drive EMI Shield
Installing and Removing PCI Add-in Cards
CAUTIONS
Do not overload the workstation board by installing add-in boards that draw excessive current.
PCI add-in boards can be extremely sensitive to electric static discharge (ESD) and always require careful
handling. After removing the add-in board from its protective wrapper or from the workstation board, place it
component side up on a grounded, static-free surface or conductive foam pad. Do not slide the add-in board
over any surface.