Service Guide

Hardware Installations and Upgrades
Intel® Workstation System SC5650SCWS Service Guide 33
Figure 21. Installing Right Side Cover
Removing and Installing the Front Bezel Assembly
Removing the Front Bezel Assembly
1. Observe the safety and ESD precautions listed in Appendix A, “Safety Information”.
2. Turn off all peripheral devices connected to the workstation. Turn off the workstation.
3. Disconnect the AC power cord.
4. Remove the left side cover. For instructions, see “Removing the Left Side Cover”.
5. Disengage the two bezel tabs from the left side of the chassis (see letter “A” in the following figure). Rotate
the left side of the front bezel assembly outward slightly (see letter “B”). Disengage the three clips that attach
the right side of the front bezel assembly to the chassis and remove (see letter “C”).