Service Guide

Workstation System Features
Intel® Workstation System SC5650SCWS Service Guide 1
1. Workstation System Features
This chapter briefly describes the main features of Intel
®
Workstation System SC5650SCWS. This chapter
provides a photograph of the product, list of the workstation system features, and diagrams showing the
location of important components, and connections on the workstation board.
Figure 1. Intel
®
Workstation System SC5650SCWS
Table 1. Workstation System Features
Feature Description
Dimensions
 Pedestal Configuration: 17.8 inches high, 9.256 inches wide, 19 inches deep
 Rack Configuration: 9.256 inches high, 17.6 inches wide, 19 inches deep
Hard Drives
 Support up to six fixed 3.5-inch hard drives, requires SAS controller add-in
adapter or SAS module card accessory for SAS hard disk drive support
 Upgradable to support six 3.5-inch hot-swap SAS/SATA hard drives with
compatible Intel
®
Hot-swap backplane assembly kits
 Optional 2.5” drive carrier (AXX25DRVADPTR) to install 2.5” hard disk drive
into 3.5” hot-swap hard disk drive bay
Peripherals
 Two multi-mount 5.25-inch peripheral bays
 One 3.5-inch peripheral bay
Control Panel
 Front Control Panel
 Intel
®
Local Control Panel (optional)
LEDs and displays
 With Front Control Panel
o NIC1 Activity
o NIC2 Activity
o Power/Sleep
o System Status LED
Power Supply
 1000-W PFC power supply
Cooling
 Two 120-mm system fans (rear fan and PCI zone)