Technical Product Specification

Appendix G: Installation Guidelines Intel® Workstation System SC5650SCWS TPS
Revision 1.2
Intel order number: E81822-002
192
5. System may experience high power consumption under Microsoft Windows* XP Service
Pack 2 when the processor is idle
Description Intel® Workstation System SC5650SCWS may experience high power consumption under Microsoft
Windows* XP Service Pack 2 when the processor is idle and there is a discontinuity in the C-states
Guideline Follow the instructions listed at the following website to apply the hot fix only to systems that are
experience this problem.
http://support.microsoft.com/kb/941837
6. When EFI Shell is selected as the first device on the BIOS boot option list, some RAID
adapters may not enter their configuration screen before the server board boots into EFI
Shell.
Description In an Intel
®
Workstation System SC5650SCWS with EFI shell as first boot device, after users press hot keys
to enter RAID adapter configuration screen that hooks option ROM on INT 19h, the system may boot in to
EFI shell instead.
Guideline Type ‘exit’ and execute under the EFI shell, the RAID adapter configuration screen will show up if
configuration screen hot keys were pressed during POST.
7. See 32MB video memory of onboard video controller after install onboard video driver
Description After install driver of Intel
®
Workstation System SC5650SCWS onboard video controller, the video driver
will report 32MB video memory instead of 8MB
Guideline The memory reported by onboard video driver is ‘attached memory’, which is accessed by the video
controller for internal operations. The graphic memory size for display fuction is still 8MB