Technical Product Specification

Overview Intel® Workstation System SC5650SCWS TPS
Revision 1.2
Intel order number: E81822-002
4
Feature Description
I/O Control Support External connections:
RJ-45 serial port A connection
One DH 10 serial port connector (optional)
Two RJ-45 NIC connectors for 10/100/1000 Mb connections: Dual GbE through the Intel
®
82575EB Network Connection.
Four USB 2.0 ports at the back of the board.
7.1 channel Audio Connections
One IEEE1394a connector
Internal connections:
Two 9-pin USB headers, each supports two USB 2.0 ports
One DH10 serial port B header
Six SATA connectors at 1.5 Gbps and 3 Gbps
Four SAS connectors at 3 Gbps (optional)
One SSI-compliant 24-pin front control panel header
Video Support ServerEngines* LLC Pilot II* with 64 MB DDR2 memory, 8 MB allocated to graphics
Integrated 2D video controller
Onboard video connector available with optional accessory cable (FXXSCVDCBL).
Dual monitor video mode is supported
Support add-in PCI Express* graphics cards
Single graphics card configuration at PCI Express* slot 6 with graphics card up to 300W.
Dual graphics cards conifiguration at PCI Express* slot 4 and slot 6 with each graphics card
up to 150W.
Keep PCI Express* Slot 3 empty for optimal air flow when populating a graphics card in PCI
Express* slot 4.
Graphics cards with power greater than 75W must be self-cooled with exhaust out the back
of the chassis
LAN Two Gigabit NICs through Intel
®
82575EB PHYs with Intel
®
I/O Acceleration Technology 2 support.
Audio Codec 7.1 channel audio support based on Realtek* ALC889 with 16/20/24-bit S/PDIF support
External audio connections through rear I/O
One internal 3-pin S/PDIF connector
One internal 2x5-pin audio connector
1394 Two IEEE 1394a ports through Texas Instruments* TSB43AB22A
One external IEEE 1394a port through rear I/O
One internal 2x5-pin IEEE 1394a connector
Security Trusted Platform Module based on ST19NP18
Server
Management
Onboard ServerEngines* LLC Pilot II* Controller
Integrated Baseboard Management Controller (Integrated BMC), IPMI 2.0 compliant
Integrated Super I/O on LPC interface
Support for Intel
®
Remote Management Module 3
Intel® Light-Guided Diagnostics on field replaceable units
Support for Intel® System Management Software 3.1 and beyond
Support for Intel® Intelligent Power Node Manager (Need PMBus-compliant power supply)
BIOS Flash Winbond* W25X64