Technical Product Specification

Intel® Workstation System SC5650SCWS TPS Intel® Light Guided Diagnostics
Revision 1.2
Intel order number: E81822-002
153
* When the workstation is powered down (transitions to the DC-off state or S5), the BMC is still on standby power and
retains the sensor and front panel status LED state established before the power-down event. If the system status is
normal when the system is powered down (the LED is in a solid green state), the system status LED will be off.
9.4 DIMM Fault LEDs
The workstation board provides memory fault LED for each DIMM socket. The following figure
shows the location of these LEDs. The DIMM fault LED illuminates when the corresponding
DIMM slot has memory installed and a memory error occurs.
Figure 59. DIMM Fault LEDs Location