Datasheet

Appendix B: Video POST Code Errors Intel® Server Board S5500WB TPS
Revision 1.9
Intel order number E53971-008
96
Appendix B: Video POST Code Errors
Whenever possible, the BIOS outputs the current boot progress codes on the video screen.
Progress codes are 32-bit quantities plus optional data. The 32-bit numbers include class,
subclass, and operation information. The class and subclass fields point to the type of hardware
being initialized. The operation field represents the specific initialization activity. Based on the
data bit availability to display progress codes, a progress code can be customized to fit the data
width. The higher the data bit, the higher the granularity of information that can be sent on the
progress port. The progress codes may be reported by the system BIOS or option ROMs.
The Response section in the following table is divided into three types:
 No Pause: The message is displayed on the local Vidoe screen during POSTor in the
Error Manager. The system continues booting with a degraded state. The user may
want to replace the erroneous unit. The setup POST error Pause setting does not have
any effect with this error.
 Pause: The message is displayed on the Error Manager screen, and an error is logged
to the SEL. The setup POST error Pause setting determines whether the system pauses
to the Error Manager for this type of error, where the user can take immediate corrective
action or choose to continue booting.
 Halt: The message is displayed on the Error Manager screen, an error is logged to the
SEL, and the system cannot boot unless the error is resolved. The user needs to
replace the faulty part and restart the system. The setup POST error Pause setting does
not have any effect with this error.
Table 58. POST Error Messages and Handling
Error Code
Error Message
Response
0012
CMOS date / time not set
Major
0048
Password check failed
Major
0108
Keyboard component encountered a locked error.
Minor
0109
Keyboard component encountered a stuck key error.
Minor
0113
Fixed Media The SAS RAID firmware can not run properly. The user should
attempt to reflash the firmware.
Major
0140
PCI component encountered a PERR error.
Major
0141
PCI resource conflict
Major
0146
PCI out of resources error
Major
0192
Processor 0x cache size mismatch detected.
Fatal
0193
Processor 0x stepping mismatch.
Minor
0194
Processor 0x family mismatch detected.
Fatal
0195
Processor 0x Intel(R) QPI speed mismatch.
Major
0196
Processor 0x model mismatch.
Fatal
0197
Processor 0x speeds mismatched.
Fatal
0198
Processor 0x family is not supported.
Fatal
019F
Processor and chipset stepping configuration is unsupported.
Major
5220
CMOS/NVRAM Configuration Cleared
Major
5221
Passwords cleared by jumper
Major
5224
Password clear Jumper is Set.
Major