Rms2Mh080

Intel® Integrated RAID Module RMS2MH080 Hardware User’s Guide 11
3 Intel
®
Integrated RAID Module
RMS2MH080 Characteristics
Figure 4. Card Layout
Table 1. Jumper Description
s
Jumper Description Type Comments
J1 - J2 Internal mini SAS Port
Connectors, Ports 0-3 and 4-7
Connection to SAS/SATA devices:
• J1 = SAS_A (Port 0-3)
• J2 = SAS_B (Port 4-7)
J3 Board-to-board connector for
Battery Backup Unit
20-pin connector Provides an interface to the daughter card that
contains the battery backup unit.
J4 Keyed I
2
C Connector 3-pin keyed
connector
Out-of-band enclosure management (SES2).
J5 RAID Premium Feature Key
Header
2-pin connector Enables support for RAID Premium Feature.
J6 UART debug header 4-pin connector Factory use only (may be removed in future)
J7 Bootstrap CONFIG header 4-pin connector Factory use only (may be removed in future)