Monthly Specification Update

Monthly Specification Update Enterprise Platforms and Services Marketing
16
Workaround None.
35. System may go to EFI first instead of Hardware RAID configuration
setup page
Problem System may go to EFI first instead of Hardware Raid configuration setup page
when using Hardware RAID and setting EFI as the first boot device
Implication There is no function impact associated with this erratum.
Status Will not fix.
Workaround 1. Change EFI booting order instead of first boot device. 2. Type “EXIT” in
Internal EFI shell, then users can enter Raid configuration setup page.
36. Lower network performance may be observed when Hyper-V role is
added in Windows* Server 2008 R2 with more than 32G memory
Problem On a dual Intel
®
Xeon
®
5600 series processor configuration with more than
32GB memory installed, user may notice network performance drop in
Windows* Server 2008 R2 when Hyper-V role is added.
Implication User may see lower than expected network performance under Windows*
Server 2008 R2.
Status This issue was fixed on BIOS 55 and later version. Change the setting in
BIOS setup Advanced -> PCI -> Maximize/minimum Memory below 4G to Min.
Workaround Reduce memory size to less than 32GB.
37. System may not enter LSI* 9260-4i/8i RAID card webBIOS when
both LSI* 9260-4i/8i and LSI* 20320-R SCSI card installed
Problem System may not enter LSI* 9260-4i/8i RAID card webBIOS with both LSI*
9260-4i/8i RAID card and LSI* 20320-R SCSI card installed
Implication User may find not able to go into LSI* 9260-4i/8i RAID card webBIOS even
Ctrl+H was pressed.
Status This issue may be fixed in a future BIOS revision.
Workaround Press CTRL key again when see blinking cursor, the blinking cursor will be on
the top left corner when Ctrl+H was pressed.