Monthly Specification Update

Enterprise Platforms and Services Marketing Monthly Specification Update
13
Implication HDD fault LED(Amber) and HDD activity LED(Green) are sharing the same
light pipe. They may light together during rebuild.
Status This issue will NOT be fixed.
27. Port 1, 2, 3 fault LED (Amber) on HDD backplane will be flashing during
POST
Problem The Amber LED of HDD on front panel will be flashing randomly during system
POST.
Implication The blinking amber LED during POST does not indicate HDD fault. It is root
caused to BIOS issue.
Status This issue was fixed in BIOS release R0042.
28. System power parameters cannot be displayed under Intel
®
Active
System Console
Problem When checking power status under Intel
®
Active System Console, the power
parameters for system/PSU cannot be displayed.
Implication iASC cannot read out current system power consumption and rating.
Status Will not fix.
Workaround None
29. System May Not Configure to CLTT Mode when using Unbuffered
Memory with Thermal Sensors
Problem When user goes to "CLTT" mode under "System Acoustics and Performance
Configuration" > "Set Throttling Mode" in BIOS version 38. After changing the
"Set throttling mode” from default "AUTO" to "CLTT" mode and saving it by
pressing F10 key. In next reboot and entering into BIOS settings, CLTT mode
is changes to "OLTT" mode.
Implication CLTT Mode is the preferred operating mode but when using UDIMM’s with
thermal sensors the system changes to OLTT mode.
Status This issue may be fixed in BIOS 41.
Workaround None