Monthly Specification Update

Monthly Specification Update Enterprise Platforms and Services Marketing
12
22. Excessive Time to Enter or Exit EFI Shell When AHCI is Enabled in BIOS
Revision R0037
Problem If AHCI is enabled in BIOS setup, it will take the user approximately three or
more minutes to enter the EFI shell from BIOS setup and approximatley three
or more minutes to exit the EFI shell.
Implication Users should expect long delays when entering the EFI shell from BIOS setup
if AHCI is also enabled.
Status This issue was fixed in BIOS 42.
Workaround None
23. Error numbering of SATA ports in TPS rev1.0
Problem SATA ports numbering is 1 to 6 on baseboard, and 1 to 4 on backplane.
Implication The description of SATA ports can not match the port numbering in BIOS.
Status This issue has been fixed in new TPS rev1.1.
24. Error numbering of SATA ports in Quick Reference Label
Problem The SATA ports numbering in QRL is from 1 to 6.
Implication The description of SATA ports can not match the port numbering in BIOS.
Status This issue may be fixed in future QRL release.
25. Error numbering of SATA ports in Quick Start User’s Guide
Problem The SATA ports numbering in QSUG is from 1 to 6.
Implication The description of SATA ports can not match the port numbering in BIOS.
Status This issue may be fixed in future QRL release.
26. HDD status LED on HDD carrier will light as bright amber during rebuild
Problem HDD status LED will demo as bright amber (close to yellow) during rebuild,
which is differentiated from amber as described in TPS.