Technical Product Specification

Intel® Server System SR1695WB TPS Environmental and Regulatory Specifications
Revision 1.4
Intel order number: E92079-005
46
Notifications to Users on Product Regulatory Compliance and Maintaining
Compliance – To ensure regulatory compliance, you must adhere to the assembly
instructions in this guide to ensure and maintain compliance with existing product
certifications and approvals. Use only the described, regulated components specified in this
guide. Use of other products/components will void the UL listing and other regulatory
approvals of the product and will most likely result in noncompliance with product regulations
in the region(s) in which the product is sold.
To help ensure EMC compliance with your local regional rules and regulations, before
computer integration, make sure that the chassis, power supply, and other modules have
passed EMC testing using a server board with a microprocessor from the same family (or
higher) and operating at the same (or higher) speed as the microprocessor used on this
server board. The final configuration of your end system product may require additional EMC
compliance testing. For more information please contact your local Intel Representative. This
is an FCC Class A device and its use is intended for a commercial type market place.
10.5 Use of Specified Regulated Components
To maintain the UL listing and compliance to other regulatory certifications and/or
declarations, the following regulated components must be used and conditions adhered to.
Interchanging or use of other component will void the UL listing and other product
certifications and approvals.
Updated product information for configurations can be found on the Intel Server Configurator
Tool web site at the following URL: http://serverconfigurator.intel.com/
.
If you do not have access to Intel’s Web address, please contact your local Intel
representative.
Server chassis (base chassis is provided with power supply and fans) – NRTL listed.
Server board – you must use an Intel server board – UL recognized.
Add-in boards – must have a printed wiring board flammability rating of minimum
UL94V-1. Add-in boards containing external power connectors and/or lithium
batteries must be UL recognized or UL listed. Any add-in board containing modem
telecommunication circuitry must be UL listed. In addition, the modem must have
the appropriate telecommunications, safety, and EMC approvals for the region in
which it is sold.
Peripheral Storage Devices – must be UL recognized or UL listed accessory and
TUV or VDE licensed. Maximum power rating of any one device or combination of
devices cannot exceed manufacturer’s specifications. Total server configuration is
not to exceed the maximum loading conditions of the power supply.
The following table references Server Chassis Compliance and markings that may appear
on the product. Markings below are typical markings however, may vary or be different
based on how certification is obtained.
Note: Certifications Emissions requirements are to Class A.