Technical Product Specification

Product Overview Intel® Server System SR1695WB TPS
Revision 1.4
Intel order number: E92079-005
2
2. Product Overview
The Intel
®
Server System SR1695WB is a rack mount 1U server system, purpose-built for
high-energy efficiency and lowest total cost of ownership in dense computing applications.
The system is integrated with an Intel
®
Server Board S5500WB and supports up to four hot-
swap SAS or SATA hard drives.
This chapter provides a high-level overview of the system features. The following chapters
provide greater detail for each major system component or feature.
Table 1. System Feature Set
Feature Description
Raw Storage Capacity
System raw storage capacity is based on the HDD capacity and number of HDDs
used in the system. Raw storage capacity is the sum of single HDD capacity used in
system. For example: if four 1 TB HDDs are used in system, the system raw storage
capacity is 4.0 TB
External Drive Bays Four hot-pluggable external drive bays
Hard Disk Drive
Supported
• 3.5-inch SATA, SAS HDD.
• 2.5-inch SATA, SAS HDD.
Processor
Support for one or two Intel
®
Xeon
®
Processor 5500 or 5600 series processors in FC-
LGA 1366 Socket B package with up to 95 W Thermal Design Power (TDP) .
Supports future processor compatibility guidelines
4.8 GT/s, 5.86 GT/s, and 6.4 GT/s Intel
®
Quick Path Interconnect (Intel
®
QPI).
Meets EVRD11.1
Memory Capacity Expandable to 64 GB maximum.
Memory Type
• 240-pin keyed support for 800/166/1333 MT/s ECC Registered (RDIMM) or
Unbuffered (UDIMM) DDR3 memory.
• 8 DIMMs total across six memory channels (three channels per processor in a
2:1:1 configuration).
• No support for Quad-Rank x4 DIMMs.
DIMM Slots Eight
Chipset
• Intel
®
chipset which includes the following components:
• Intel
®
5500 chipset IOH (IOH24D)
• Intel
®
82801Jx I/O Controller Hub (ICH10R)
System Connectors
/ Headers
External I/O connectors:
 DB-15 Video connectors
 RJ-45 serial Port A connector
 RJ-45 connector for 10/100/1000 LAN
 One 2x USB 2.0 connectors
 One RJ-45 over USB for 10/100/1000 LAN
Internal connectors/headers:
 Two USB 2x5 pin header, supporting up to four USB 2.0 ports
 One low-profile USB 2x5 pin
 One DH-10 Serial Port B header
 One 2x8 pin VGA header with presence detection to switch from rear I/O video
connector
 Six SATA II connectors
 Dual Connectors for Intel
®
I/O Expansion Module
 One RMM3 connector to support optional Intel
®
Remote Management Module 3
 SATA SW RAID 5 Activation Key Connector
 One front panel header