Service Guide

50 Intel

Server System SR1690WB Service Guide

Installing and Removing the Intel

Remote

Management Module 3 and the Intel

RMM 3 NIC

Installing the Intel® RMM3 and Intel® RMM3 NIC

1. Squeeze the sides of the Intel

RMM3 NIC module cover to disengage it from the

server system back panel and remove it (see letter “A”)

Figure 40. Installing the Intel

RMM3 and Intel

RMM3 NIC

2. Attach the bracket of Intel

RMM3 NIC module by two screws (see letter “A”).

3. Connect the Intel

RMM3 cable to the slot on server board (see letter “B”).

4. Attach the Intel

RMM3 module to rear chassis by two screws (see letter “C”).

Optical

Device

AF003315