Service Guide

28 Intel
®
Server System SR1690WB Service Guide
Figure 15. Removing the Processor Air Duct
Installing the Processor Air Duct
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information”.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see “Removing the System
Cover”.
4. Lower the air duct into place; align the air duct side walls to the corresponding slots
on the bracket behind the four system blower fans and insert into position. Use
caution not to pinch or disengage cables that may be near or under the air duct.
Optical
Device
AF003224