Specifications

Embedded SATA RAID
84 Intel
®
Server System SR1670HV Service Guide
Figure 122. Configuration Menu Options
The ARRAY SELECTION MENU displays the drives connected to the SATA ports.
2. Use the up/down arrow key and <Space> key to select each drive you want to include
in the RAID set.
As each drive is selected, the drive indicator changes from READY to ONLIN A[X]-[Y],
where X is the array number, and Y is the drive number.
Figure 123. Array Selection Menu
Drive Selection Tips:
Information for selected hard disk drive will be displayed at the bottom of the
screen.
You need at least two identical hard disk drives when creating a RAID 1 set.
You need at least four identical hard disk drives when creating a RAID 10 set.
2. After selecting each drive to be included in the RAID set, press the <F10> key to
configure settings.
3. Press <Space> to select the configurable array.