Specifications

BIOS Updates and Configuration
74 Intel
®
Server System SR1670HV Service Guide
6.3.5.1.1 BMC Firmware Version: #.##
Displays the BMC Firmware version of the BMC Management Module.
6.3.5.1.2 Set LAN# Configuration
Two sub-menus used to configure on-board LAN Port 1 and the Server Management LAN
Port (LAN Port 3) for Serial-over-LAN support. Configurable LAN parameters in both these
sub-menus include:
IP Address Source [DHCP Mode/Static Mode]
IP Address [000.000.000.000]
Subnet Mask [000.000.000.000]
Gateway Address [000.000.000.000]
6.3.5.1.3 View BMC System Event Log
Selecting this option opens a System Event Log window that displays system events
generated by the BMC for board/system sensor threshold violations.
6.3.5.1.4 Clear BMC System Event Log
Selecting this option clears the BMC System Event Log of all entries.
6.3.5.1.5 BMC Watch Dog Timer Action [DISABLED]
Selecting this option allows the BMC to reset or power down the system if the operating
system crashes or hangs. Available settings are Enable or Disabled.
6.3.5.2 Remote Access Configuration Sub-Menu
The items in this menu allow you to configure Remote Access features. Select an item and
then press <Enter> to display the configuration options.
Figure 112. Remote Access Configuration Menu
6.3.5.2.1 Remote Access [Enabled]
Enables or disables the remote access feature.
Configuration options: [Disabled] [Enabled]
NOTE: The following items display only when Remote Access is set to [Enabled].