Product Service Guide

22 Intel® Server System SR1630BC Service Guide
See the Intel
®
Server System SR1630BC Technical Product Specification for additional
information regarding the memory sub-system.
Power Supply
A minimum of 400 Watts is required. Your supply must provide a minimum of 3.5 A of 5
V standby current or the board will not boot.
Optional Hardware
Intel
®
RAID Activation Key
If RAID 5 is needed, you can install the optional Intel
®
RAID Activation Key
AXXRAKSW5. To enable RAID 5, this activation key is placed on the SATA Key
connector located at the left side of the server board. For information on how to install the
Intel
®
RAID Activation Key AXXRAKSW5 accessory to enable RAID 5, see the
documentation that is included with the accessory kit.
Hard Disk Drives
The server board provides six SATA ports. The six SATA ports are near the rear left side
of the server board.
See the documentation included with your server chassis for additional drive information
and drive installation instructions.
Note: The Intel
®
Remote Management Module 3 will not be supported in the Intel
®
Server
System SR1630BC system.