Technical Product Specification

Cooling Sub-System Intel® Server System SR1630BC TPS
Revision 1.5 Intel order number E44588-005
19
4. Cooling Sub-System
The cooling sub-system consists of two 97 x 94 x 33mm blower fans and a system air duct.
These components provide the necessary cooling and airflow to the system. A fan on the
processor heatsink is not needed.
You must properly install the air duct and the top cover to maintain the required airflow within
the system.
Note: The Intel
®
Server System SR1630BC does not support redundant cooling. If a fan blower
fails, you must power down the system as soon as possible so you can replace the failed fan
blower.
AF001524
Figure 11. Fan Module Assembly – Intel
®
Server System SR1630BC