Technical Product Specification

Intel
®
Server System SC5650BCDP TPS Power Sub-System
Revision 1.5 Intel order number: E80367-002 17
1
+12V4 Blue/White Stripe
2
COM Black
3
COM Black
4
+5Vdc RED
3.1.3.6 P9 Right-angle SATA Power Connector
Connector Housing: JWT* F6002HS0-5P-18 or equivalent
Contact:
Table 13. P9 Right-angle SATA Power Connector
Pin Signal 18 AWG Color
1 +3.3V Orange
2 Ground Black
3 +5V Red
4 Ground Black
5 +12V4 Green
3.1.3.7 P10 SATA Power Connector
Connector Housing: 5-pin Molex* 67926-0011 or equivalent
Contact: Molex* 67926-0041 or equivalent
Table 14. P10 SATA Power Connector
Pin Signal 18 AWG Color
1 +3.3V Orange
2 COM Black
3 +5V Red
4 COM Black
5 +12V2 Blue/White
3.1.4 AC Input Requirements
The power supply operates within all specified limits over the following input voltage range,
shown in the following table. Harmonic distortion of up to 10% of the rated line voltage must not
cause the power supply to go out of specified limits. The power supply does power off if the AC
input is less than 75VAC +/-5VAC range. The power supply starts up if the AC input is greater
than 85VAC +/-4VAC. Application of an input voltage below 85VAC does not cause damage to
the power supply, including a fuse blow.