Product Service Guide

Intel
®
Server Board S5500BC User’s Guide 19
5. Attach fan power cable to server board as shown.
Figure 14. 2U Reference Heatsink Assembly
6. Reinstall and reconnect any parts you removed or disconnected to reach the
processor sockets.
7. Replace the server's cover and reconnect the AC power cord. Refer to the
documentation that came with your server chassis for instructions on installing the
server's cover.
Replacing a Processor
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” for more information.
2. Turn off all peripheral devices connected to the server and turn off the server.
3. Remove the AC power cord from the server.
4. Remove the server's cover.
5. Unplug the processor fan cable from the server board.
6. Loosen the four captive screws on the corners of the heatsink.
7. Twist the heatsink slightly to break the seal between the heatsink and the processor.