Product Service Guide

Hardware Installations and Upgrades

Intel® Server System SC5650BCDP Service Guide 61

Installing Feet for a Pedestal-configured Chassis

Note: Do not install feet on your Intel

Server System SC5650BCDP if it is to be installed in a

rack. Only install feet on a pedestal-configured chassis.

1. Observe the safety and ESD precautions listed in Appendix G, “Safety Information”.

2. Power down the server and unplug all peripheral devices and the AC power cable.

3. Lay the chassis down on its right side.

4. Insert rubber foot into chassis hole (see letter “A” in the following figure). Secure foot

to chassis by inserting a pin through the rubber foot (see letter “B”). Repeat process

for remaining feet.

Figure 67. Installing Feet on Chassis

5. Put chassis in the upright position.

6. Reconnect all peripheral devices and the AC power cable to the server. Power up the

server.

TP01709