Product Service Guide

Hardware Installations and Upgrades

46 Intel® Server System SC5650BCDP Service Guide

6. Insert the CD-ROM or DVD-ROM drive into the 5.25-in device drive bay (see letter

“C” in the following figure). Line up holes in CD-ROM drive with holes in chassis

(see letter “D”). Move latch to the “lock” position (see letter “E”). Connect power (P5

or P6connector from the power supply. An additional 4-pin IDE male-to SATA 15-

poin power cables adapter may be needed if the CD-ROM or DVD-ROM does not

have a 4-pin power connector.) and data cables to the rear of the CD-ROM or DVD-

ROM drive (see letter “F”).

Figure 45. Installing CD-ROM or DVD-ROM Drive

7. If necessary, remove the filler panel from the front bezel assembly.

Data

Power

AF002921

TP01723