System Configuration User Guide

Terminal Enable (/te)
syscfg {/te | /termenable} Channel_ID {enable | disable} {BSB | DEL} {enable | disable} {enable |
disable} {CRLF | NULL | CR | LFCR | LF} {CR | NULL}
Channel_ID
IPMI Channel ID (this must be 4 for
S5000PAL, S5000PSL, and S5000PSA
server boards)
enable | disable
Line Edit enable
BSB | DEL
Delete control
enable | disable
Echo control
enable | disable
Handshake control
CRLF | NULL | CR | LFCR | LF
Output newline sequence
CR | NULL
Input newline sequence
Configures terminal mode communications on the specified BMC channel. See IPMI 2.0
Specification, Chapters 14 and 25, for more information on IPMI Serial/Modem interface and
commands.
NOTE
This command is not supported on Intel Server Board X38MLST.
Examples:
syscfg /te 4 enable DEL enable enable lfcr cr
System Configuration Utility User Guide 49