System Configuration User Guide

Serial Page Configuration (/spc)
syscfg {/spc | /serialpageconf} Channel_ID Page_Destination_Selector Dial_String_Selector {1 | 2} {7 | 8}
{none | odd | even} {9600 | 19200 | 38400 | 115200}
Channel_ID
IPMI Serial Channel ID (this must be 4 for
S5000PAL, S5000PSL, and S5000PSA
server boards)
Page_Desitination_Selector
Page Destination Selector
Dial_String_Selector
Page String Selector
1 | 2
Number of parity bits
7 | 8
Number of data bits
none | odd | even
Parity
9600 | 19200 | 38400 | 115200
Baud Rate
Configures serial paging for platform alerting with the BMC on the specified channel. See
IPMI 2.0 Specification, Chapters 14 and 25, for more information on IPMI Serial/Modem interface
and commands.
NOTE
This command is not supported on Intel Server Board X38MLST.
Example:
syscfg /spc 4 2 4 1 8 none 19200
46 System Configuration Utility User Guide