System Configuration User Guide

3b
Selects Connection mode.
4
Set Inactivity Timeout (in 30 second
increments).
6a
Set Close on DCD loss.
6b
Enable Inactivity timeout.
7a
Set Baud rate in bits per second.
7b
Enable DTR hang-up.
7c
Set Flow control.
8a
Enable MUX switch on DCD loss.
8b
Set MUX baseboard to BMC switch.
8c
Set MUX BMC to baseboard switch.
8i
Enable Ping before MUX switch.
8j
Enable Ping.
8k
Enable Ping during callback.
8l
Set Connection Mode settings.
14
Set Page blackout interval in minutes.
15
Set SNMP Community string. Linux users
should enclose the string in double quotes.
29a
Enable Terminal handshake.
29b
Enable Terminal echo.
29c
Set Terminal delete control.
29d
Enable Terminal line edit.
29g
Set Terminal output newline sequence.
29f
Set Terminal input newline sequence.
Configures the serial port for server management.
NOTE
This command is not supported on Intel Server Board X38MLST.
Examples:
syscfg /sc 4 2d none+straight+MD5
System Configuration Utility User Guide 43