System Configuration User Guide

Serial Configuration (/sc)
syscfg {/sc | /serialconf} Channel_ID {
[2a {None | Straight | MD5}]
[2b {None | Straight | MD5}]
[2c {None | Straight | MD5}]
[2d {none | Straight | MD5}]
[3a {enable | disable}]
[3b direct]
[4 {0..450}]
[6a {enable | disable}]
[6b {enable | disable}]
[7a {9600 | 19200 | 38400 | 115200}]
[7b {enable | disable}]
[7c {none | RTSCTS | XONXOFF}]
[8a {enable | disable}]
[8b {enable | disable}]
[8c {enable | disable}]
[8i {enable | disable}]
[8j {enable | disable}]
[8k {enable | disable}]
[8l {enable | disable}]
[14 {0..255}]
[15 ASCII_String]
[29a {enable | disable}]
[29b {enable | disable}]
[29c {BSB | DEL}]
[29f {CR | NULL}]
[29g {CRLF | NULL | CR | LFCR | LF}]
}
Channel_ID
IPMI Channel ID (this must be 4 for all
supported server boards).
2a
Authentication type for Callback privilege
level. Multiple privilege levels may be
specified by using the plus sign (see example
below).
2b
Authentication type for User privilege level.
Multiple privilege levels may be specified by
using the plus sign (see example below).
2c
Authentication type for Operator privilege
level. Multiple privilege levels may be
specified by using the plus sign (see example
below).
2d
Authentication type for Administrator
privilege level. Multiple privilege levels
may be specified by using the plus sign (see
example below).
3a
Selects Terminal mode.
42 System Configuration Utility User Guide