System Configuration User Guide

PEF Policy (/pefp)
syscfg {/pefp | /pefpolicy} Policy_table_index {enable | disable} {1..15} {ALWAYS | NEXT_E | STOP |
NEXT_C | NEXT_T} Channel_ID Destination_table_index
Policy_table_index
Policy Table Index
enable | disable
Enable policy
1..15
Policy number
ALWAYS | NEXT_E | STOP | NEXT_C |
NEXT_T
Alert Policy:
ALWAYS = always send an alert to the
destination indicated in the policy table entry
specified by argument 1.
NEXT_E = if an alert was successfully sent
to the previous destination attempted, then do
not send an alert to the destination indicated
in the policy table entry specified in
argument 1, but go to the next policy table
entry with the same policy number instead.
STOP=if an alert was successfully sent to the
previous destination attempted, then do not
send an alert to the destination indicated in
the policy table entry specified in argument
1, and do not process any more policy table
entries.
NEXT_C = if an alert was successfully sent
to the previous destination attempted, do not
send an alert to the destination indicated in
the policy table entry specified in argument
1, but go to the next policy table entry with
the same policy number but that will send an
alert on a different channel.
NEXT_T = if an alert was successfully sent
to the previous destination attempted, do not
send an alert to the destination indicated in
the policy table entry specified in argument
1, but go to the next policy table entry with
the same policy number but a different
destination type.
Channel_ID
IPMI Channel ID for a BMC channel
Destination_table_index
Destination Table Index
Configures the Platform Event Filter policy table used by the BMC on the specified channel. See
IPMI 2.0 Specification, Chapter 17, for more information on Platform Event Filtering.
34 System Configuration Utility User Guide