System Configuration User Guide

LAN Alert Enable (/lae)
syscfg {/lae | /lanalertenable} Channel_ID Gateway_IP_Address {Gateway_MAC_Address | “resolve”}
SNMP_Community_String [Backup_Gateway_IP_ Address {Backup_Gateway_MAC_Address | “resolve”}]
Channel_ID
IPMI Channel ID
Gateway_IP_Address
Gateway IP Address for the specified LAN
channel
Gateway_MAC_Address
Gateway MAC Address for the specified
LAN channel or “resolve” to automatically
resolve the MAC Address
SNMP_Community_String
Enter the SNMP community string, or the
null string ("")
Backup_Gateway_IP_ Address
Gateway IP Address for the specified LAN
channel
Backup_Gateway_MAC_Address
Gateway MAC Address for the specified
LAN channel or “resolve”
NOTE
The Gateway_MAC_Address and Backup_Gateway_MAC_Address may
optionally be set to “resolve”. If set to “resolve”, syscfg will attempt to
resolve the MAC address before writing any values to firmware. If the MAC
Address resolution fails, syscfg quits, without writing, and prints an error
message.
Enable LAN alerting on the specified channel. See IPMI 2.0 Specification for more information.
Examples:
syscfg /lae 2 10.110.40.3 03-FE-02-41-F3 public
syscfg /lae 2 10.110.40.3 03-fe-02-41-f3 "" 10.110.40.4 0f-7e-42-4a-33
System Configuration Utility User Guide 23