System Configuration User Guide

LAN Alert Configuration (/lac)
syscfg {/lac | /lanalertconf} Channel_Id Alert_Destination_Index Alert_Destination_IP_Address
{Alert_ID_MAC_Address | “resolve”} {enable | disable } {enable | disable} {1..7} {1..255} {SNMP | SMTP}
Channel_ID
IPMI Channel number.
Alert_Destination_Index
Index into the Alert Destination table.
Alert_Destination_IP_Address
IP address of the alert destination in the dot
separated decimal value format: n.n.n.n,
where n is a number between 0 and 255.
Alert_ID_MAC_Address
MAC address of the alert destination in the
hexadecimal format separated by hyphens:
hh-hh-hh-hh-hh-hh, where h is a hexadecimal
value from 0 to F., or “resolve” to
automatically resolve the MAC Address
enable | disable
Backup Gateway state.
enable | disable
Alert Acknowledge state.
1..7
Retry count.
1..255
Retry interval in seconds.
SNMP | SMTP
Alert destination type: SNMP (Simple
Network Management Protocol) or SMTP
(Simple Mail Transport Protocol). The
default is SNMP.
Configures the LAN Alert destinations for a channel. See IPMI 2.0 Specification for more
information.
Example:
syscfg /lac 1 1 10.78.211.40 03-FE-02-41-F3 disable disable 0 1 SNMP
22 System Configuration Utility User Guide