Specification Update
Monthly Specification Update
Summary Tables of Changes
The following tables provide an overview of known errata and known document changes that
apply to the specified Intel Server Products. The tables use the following notations:
Doc
Intel intends to update the appropriate documentation in a future revision.
Fix
Intel intends to correct this erratum.
Fixed
This erratum has been corrected.
NoFix
There are no plans to correct this erratum.
Shaded
This item is new or has been modified from the previous specification update.
Table 1. Errata Summary
No. Plans Description of Errata
1. Fix Returning to the BIOS Setup Utility from EFI causes the system to hang after using the Syscfg utility.
2. Fix Platform Confidence Test reports a hard disk test error with BIOS Setup option SATA Mode set to
‘Enhanced’.
3. Fix After clearing the CMOS, BIOS Setup will report that Open Loop Throughput (OLTT) is set even
though memory supporting Closed Loop Thermal Throttling (CLTT) is installed.
4. Fix Junk characters appear while listing the directories in DOS.
5. Fix Memory resource conflicts on device “Intel® 5400chipset Quickdata Technology Device 402F”
6. NoFix SR1560SF system doesn’t implement chassis intrusion function
7. Fix RHEL5 /Xen can not boot with SW RAID enabled
8. Fix Current SW RAID drivers are not present in IDA CD
9. Fix BIOS changes boot order after removing USB devices
10. No Fix Entering the incorrect system password three times will not take user to BIOS error manager and
display an error code as specified in BIOS EPS rev 1.5
11. No Fix BIOS EPS ver 1.5 incorrectly states system passwords are not case sensitive.
Table 2. Documentation Changes
No. Plans Document Name Description of Documentation Change
1. Fix
The Intel
®
Server Board
S5400SF BIOS External
Product Specification
Administrator/User password is case sensitive.
2. Fix The Intel
®
Server Board
S5400SF series Configuration
Guide
Remove order item mm# 891283.
3. Fix
The Intel
®
Server Board
S5400SF BIOS External
Product Specification
Memory Mapped I/O Start Address is 2.00GB.